ETOE Firmware Upgrade

To achieve the peak performance of your ETOE projector, it is highly recommended to keep its firmware up to date all the time.

Content
1.Check the necessity of firmware upgrade
2.How to update the firmware of your ETOE projector?
3.How to check the results of the update?
4.Troubleshooting
5.Introducing our new firmware
6.Choose your model and download the firmware 
 

Check the necessity of firmware upgrade

1. Turn on the projector and go to HomePage>Settings>About;
2. Check the version number on “System Version”;
3. If the version is not the same as the newest one, it is recommended to update to the newest one. The download address is at the end of this page.

 

How to update the firmware of your ETOE projector?

Preparation:

1.A USB stick with FAT32 format and its capacity should be less than 64 GB.

2.The right firmware in bin format.

Product: D2(A1171),D2 Pro(A1172), E2(A1191),E2 Pro(A1192)

1. Download the newest firmware for your projector model at the bottom of this page, choose the file type according to your situation.

  • Rar Version: The file ended with ".rar" has been compressed to a smaller size. Unzip the file. Highly recommend using "The Unarchiver" for Mac and " 7-zip" for Windows laptops.
  • Bin Version: The file ended with".bin" is the original file so that the file size will be large.

2. Copy the firmware file to the root folder ( highest folder in the hierarchy) of the USB flash;
3. Connect the USB flash to the projector on the USB port;
4. Plug in the power cord of the projector and long press the power button;
5. The update will start automatically, and the screen will showed a upgrade bar as below;

6. After the update finishes, the projector will restart automatically.

Product: D1(A1121)

1. Download the firmware;
2. Copy the software to the root file of your USB flash;
3. Power on the projector;
4. Plug in the USB flash to the USB port of the projector;
5. Select Setting>software update with USB flash;
6. Wait for the update.

Product: E3 Pro (A1332)

1. Download the newest firmware for your projector model at the bottom of this page, choose the file type according to your situation.

  • Rar Version: The file ended with ".rar" has been compressed to a smaller size. Unzip the file. Highly recommend using "The Unarchiver" for Mac and " 7-zip" for Windows laptops.
  • Bin Version: The file ended with".bin" is the original file so that the file size will be large.

2. Copy the firmware file to the root folder ( highest folder in the hierarchy) of the USB flash;
3. Connect the USB flash to the projector on the USB port;
4. Plug in the power cord of the projector and long press the power button;
5. The update will start automatically, and the screen will showed a upgrade bar as below;

6. After the update finishes, the projector will power off automatically;
7. Turn on the projector, and a page to set language will appear. Choose the language you prefer, navigate to compete button, and press "OK" to finish it.

Watch the video to understand it better

How to check the results of the update?

Product: D2,D2 Pro, E2,E2 Pro,E3 Pro

1. Go to HomePage of the projector,
2. Choose Settings>about>
3. Check the System Version to see if it is upgraded to the newest version.

Product: D1

1. Go to Setting>Version

Troubleshooting

Case  Solution
Remote or projector can't work after the upgrade.

1.Make sure to upgrade with the correct model version. If it's the wrong firmware, upgrade the correct firmware again.

2.Check the battery is good on the remote by clicking any button to see if the indicator turns on blue or red.
The upgrade process is interrupted, and the power off. Re-do the upgrade again. Plug in the USB flash, power on the projector, and long-press the power button.
Nothing happens after power is on. The USB flash with the firmware has been inserted into the projector.

For D2,D2 Pro, E2, E2 Pro:

1.The USB flash is inserted first and then connect the power cord. The indicator behind the projector turns red.

2. Make sure to long-press the button power until the upgrade bar appear.

 

For D1

Make sure to choose setting>Software Update(USB) on the menu.

 
The remote control can't select language after the upgrade.

Ensure that the remote control indicator is red to control the projector system. Please press the system switch button to turn the indicator red if the remote control is blue.
The projector turns on and off and can't be controlled.

1.Please be sure that the upgrade is completed 100%. If the upgrade process is interrupted, the projector will turn on and off by itself.

2.Check if the power button is stuck. Try to release it by pressing it left and right.

 

 

Introducing our new firmware